Jump to: navigation, search

3D Printer decisions

Revision as of 15:20, 5 March 2017 by Gkaklas (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

3D Printer decisions

RepRap Prusa Mendel

We started a project to build and maintain a 3D printer. After some discussion on 16. June, we decided that we will build the RepRap Prusa Mendel, because it seems to be well suited for a Hackerspace, costs less than 200€ if we get the parts locally and from recycled parts.

The parts needed for the RepRap Mendel are almost entirely standard parts, which can be found in almost any hardware store. These are mostly M8 thread rods, M8 screws and nuts, standard skateboard bearings, the common NEMA 17 stepper motor, etc. (Taken partly from the RepRap Wiki)

Take look also at some acessories and supplies for the RepRap.