Jump to: navigation, search

File:Hot end concept.svg

Revision as of 19:11, 10 July 2012 by Zeptomoon (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

File:Hot end concept.svg

Hot_end_concept.svg(SVG file, nominally 512 × 256 pixels, file size: 20 KB)

Hot end idea concept for the RepRap.

The colors are for easy distinction between individual parts. The parts are from left to right:

dark gray: Filament (3mm diameter)
pale yellow: Anti-stick lining6mm PTFE tube
blue gray: Filament guide (M10x30mm hex screw with 6mm hole and partly M6 tap)
greens: Heat sink (small and large washers)
blue: Fixation (M10 nut)
yellow: Extrusion nozzle (M10x15mm allen screw with M10 tap and 6mm/0.5mm hole and beveled tip)
orange: Heater block (40x20x10mm aluminum block with M10 tap and holes for 2 resistors & 1 thermistor)

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current19:11, 10 July 2012Thumbnail for version as of 19:11, 10 July 2012512 × 256 (20 KB)Zeptomoon (Talk | contribs)Hot end idea concept for the RepRap. The colors are for easy distinction between individual parts. The parts are from left to right: {| | dark gray: || '''Filament''' (3mm diameter) |- | pale yellow: || '''Anti-stick lining'''6mm PTFE tube |- | blue gr
  • You cannot overwrite this file.

There are no pages that link to this file.